Make your own free website on Tripod.com

Suzuki PE/RS 175/250/400

Specs

Home
Specs
Photo Album
Contact Me

Spark plug gap - .5mm

Carberator type - Mikuni VM32SS, vm34SS (pe175) 
VM36ss (pe250) vm38ss (pe400) all roud slide mikuni.

Front fork psi - 11-18

oil/gas ratio 20:1, 32:1 with good quality oil is fine.

Tyre Sizes - Front -  3.00-21
           - Rear  -  4.00-18

Recommended Spark Plug - NGK B10egv (cold) B9EGV (hot) B8EGV (trail riding)
Champion's RN2C, RN3C,N2C,N3C can aslo be used. (2 is cool and 3 is hot)

Transmission oil: multi grade 20w50 motor oil./ 800 ml
Service & inspection:
Check cylinder bore using cylinder guage @ 20mm (.79 inches)
Standard: 2mm - 62.015mm
Service limit 62.070mm
(after reboring, chamfer sharp metal away from ports)
 
Piston Ring: fit the ring in the bottom of the cylinder and measure the end gap:
standard: .20 - .35mm
service limit: .85mm (.33 inches)
 
Reed valve: Check for clearance around the valve and its seat. Should be no more than .2mm (.008 in.)
 
Clutch plate:
check thickness,
standard 2.9 - 3.1 mm
sevice limit 2.6mm (.10 inches)
 
Clutch spring:
of one clutch spring is longer, replace them all at the same time.
 
Cylinder head torque:
14.5-21.5 foot pounds.
 

Full Specification:
Dimensions and wight:
overall length....................2,180 mm (85.8in.)
width................................. 865 mm (34 in.)
Wheel base........................ 1,350 mm (53in)
ground clearance................305mm (12 in.)
Dry weight............................104 kg (229 lbs)
 
ENGINE: (pe 175 only)
Type...................................two stroke Power reed valve
bore..................................... 62mm
stroke.....................................57mm
piston displacment.............10.5 cu in.
corrected compression ratio: 7.9:1
 
Transmission:
6 speed constand mesh.
clutch..................................wet multi plate
Pattern:.................................1 down 5 up
Chain..................................... 106 links daido D.I.D
 
Electrical
ignition...................................suzuki "PEI"
Ignition timing: 19.5 Degree B.T.D.C at 8000 r/min
 
brakes: expanding type.